All the works associated with this project required TIII possessions. As there were not enough 27hr or 52hr possessions, most of the works had to be delivered in mid-week night possessions providing a maximum of 3hrs clear working time. The works involved were super critical, due to the number of previous failures within the infrastructure. The RJ Power Rail Access Team and the Network Rail Possessions Access Manager worked collaboratively to ensure an achievable programme was developed.
RJ Power Rail took delivery of approx. 40 cable drums that were free issued from Network Rail. These cable drums were delivered into RJ Power Rail’s own secure depot facility. All the drum numbers and their locations were attributed to a ‘workbank datasheet’ to provide full supply and installation traceability. The second part of the project required RJ Power Rail to supply the materials and log them in the same method.
Using the workbank datasheet, all the cables were then cut to the required length and one end of the cable was lugged in readiness. These cables were then palletised and numbered relating to the mileages and the route numbering scheme.
The site team then loaded the pallets onto our lorry and delivered them to the site on a ‘just in time’ basis prior to the possession.
Given the tight time constraints of the access regime, the experienced in-house team led by Adam Lovegrove were able to deliver and install on average 15 cables per week. This quantity, in restricted locations and during small possession durations, could only have been achieved with the years of knowledge and experience that the RJ Power Rail Team has.